advantage of the medium frequency induction heating furnace:

the medium frequency  induction heating furnace refers to the overall penetration heating of the metal before thermal deformation or heat treatment. It is a kind of power supply that converts the power frequency 50HZ alternating current into the intermediate frequency (300HZ to 20KHZ), and the three-phase power frequency alternating current is rectified and changed. Into direct current, then change the direct current into an adjustable intermediate frequency current, supply the intermediate frequency alternating current flowing through the capacitor and the induction coil, generate high-density magnetic lines in the gravitational ring, and cut the metal data contained in the induction coil. , a large eddy current is generated in the metal material. This eddy current also has some properties of the intermediate frequency current, that is, the free electrons of the metal itself move in the metal body with resistance to generate heat.
 
 
1. Fast heating speed, high consumption efficiency, less oxidative decarburization, saving data and forging die costs.
 
Since the principle of medium frequency induction heating is electromagnetic induction, the heat is generated in the workpiece itself. The ordinary workers can stop the continuous work of the forging task after working in the medium frequency electric furnace. The professional workers are not required to stop the furnace and seal the furnace early. . Don't worry about the cost of the billet heated by the coal stove caused by power outage or equipment problems. Because the heating method has a fast heating rate, the oxidation is extremely small, and at least 20-50 kg of steel raw materials are saved per ton of forgings and coal burning furnace, and the data application rate is up to 95%. Due to the heating method of the heating method, the temperature difference of the core watch is extremely small, so the forging die life is greatly increased in forging, and the roughness of the forging surface is also less than 50 um.
 
2. Excellent working environment, progressive worker labor environment and company image, no pollution, low energy consumption.
 
Compared with the coal stove, the induction heating furnace will not be bake and smoked by the coal stove under the scorching sun. It can also reach the requirements of various indicators of the environmental protection department, and at the same time establish the external image of the company and the future development trend of the forging industry. . Induction heating is the most energy-efficient heating method in electric heating furnaces. The power consumption of tons of forgings heated from room temperature to 1100 degrees is less than 360 degrees.
 
3. Heating average, the core table temperature difference is very small, and the temperature control precision is high.
 
Induction heating heat is generated in the workpiece itself, so the heating average is small, and the core surface temperature difference is extremely small. The temperature control system can be used to accurately control the temperature and improve the quality and yield. The medium frequency diathermy furnace heating installation has the advantages of small volume, light weight, high efficiency, excellent thermal processing quality and favorable environment. It is rapidly eliminating coal-fired furnaces, gas furnaces, oil-fired furnaces and ordinary resistance furnaces. It is a new generation of metal heating equipment. .
 
4. The melting speed is fast, the energy saving is energy-saving, the burning loss is small, and it is easy to start.
 
The main equipment of the medium frequency diathermy forging and heat treatment workshop, the stability, reliability and safety of its work is the guarantee for the normal and stable work of the forging and heat treatment consumption line of the flow operation.
intersting Products:*
Name:*
Company:
Email:*
Tel/Mobile:
Tell us your needs (as specific as possible)
-