Induction heating quenching furnace/quenching equipment

Induction heating quenching furnace/quenching equipment

used for gears, bearings, axle, valve, cylinder and all kinds of car parts and machinery parts quenching and tempering treatment.

Features

This equipment is mainly used to quench the clutch, the clutch disc hub, and other thin pieces products. The cluth and products will be durable ,they are not distorted after the quenching.The whole process of quenching is automatic continuity.

 

Detailde


1. Application
 
used for gears, bearings, axle, valve, cylinder and all kinds of car parts and machinery parts quenching and tempering treatment.
 
Output power : 20-750KW
 
Output frequency : 2.5-500KHZ
 
Quenching depth : 0.3-15mm
 
The highest using temperature  1250 °C
 
Output voltage  20-800V
 
Quenching materials  steel, iron
 
Quenching shapes  various shapes
 
Up-down materials method  Automatic and manual
 
Structure  vertical or horizontal
 
We will match digital system according to various quenching process configuration.
 
Quench types
 
External circular quenching series, for all kinds of shaft, rods, tubes, circular parts (such as bearings, valve, etc) whole or local quenching of outside round face
 
Semi-atuo quenching series, for all kinds of tubing, mechanical parts inside circles whole or local quenching (such as cylinder liner, bushings, etc.)
 
 Super-large parts of quenching series, the quality of larger, heavier super-large parts whole or local quenching (such as Marine gear, dam locks rails and large oil pipelines, roll, etc.)
 
Bent axle quenching equipment
 
This equipment is mainly used for quenching all kinds of crankshaft surface, the structure is simple, the operation is convenient.
 
 
Quenching machine adopts integration design, by mechanical drive institutions, induction furnace, spray system lifting mechanism, workpiece rotate drive device, workpiece cooling device component, machine tool the whole work by mitsubishi PLC control constitutes. Photoelectric signal detection trip; Digital display choose interface.
 
Heating and cooling equipment adopts computer can be pre-set centralized control, process parameters, the production process automatic control. The computer screen can real-time display operation process parameters, and have the procedures and operation records storage, copy function of U disk
 
Main technical parameters
 
The biggest diameter workpiece 1200mm
 
6000mm workpiece maximum length
 
Workpiece move speed, 80-800mm/min
 
Workpiece rotate speed, 20-100r/min
 
Quenching mode, integral quenching
 
Cluth quenching equipment , thin product quenching equipment
 
1.Application
 
This equipment is mainly used to quench the clutch, the clutch disc hub,  and other thin pieces products. The cluth and products will be durable ,they are not distorted  after the quenching.The whole process of quenching is automatic continuity.
 
2.components of induction heating furnace
hydraulic press; high frequency power source,quenching machine tool,automatic feeding system,other equipment

intersting Products:*
Name:*
Company:
Email:*
Tel/Mobile:
Tell us your needs (as specific as possible)