Continuous casting billet medium frequency induction reheating furnace

Continuous casting billet medium frequency induction reheating furnace

This design of billet heating furnace is generally used in steel bar production line, continuous heating of billet.

Features

Safe operation and fast heating,Heating temperature is uniform, can reach 1250 degrees

 

Detailde


This design of billet heating furnace is generally used in steel bar production line, continuous heating of billet.
 
1.Safe operation and fast heating
2.Heating temperature is uniform, can reach 1250 degrees
3.Start and stop at any time, no need to warm up
4.Clean and clean, improve the image of the workshop.

1. The medium frequency cabinet adopts cold-rolled steel plate spray treatment, component layout, easy to install, debug, maintain, and the cooling method is air-cooled or water-cooled.
 
2. The rectifier bridge (KP pipe) and the inverter bridge (KK pipe) all adopt high-quality thyristors, and the control circuit uses high-quality components to make the equipment have high reliability. The output power is automatically adjusted during operation so that the device is always in the working state of maximum output power and effective heating speed.
 
3.The protection circuit of the device is perfect, the thyristor is always working within the safe range, the life is obviously prolonged, and the damage rate is greatly reduced.

The size of the furnace body is customized according to the size of the billet, and the maximum length is 3 meters wide.
The hydraulic retracting device can be used to adjust the speed of the billet

Specification And Technical Parameter
Model
MF power 
Input  voltage
DC Current 
MF frequency
       KGPS-200
200kw
3ph,380V
400A
2-10KHZ
KGPS-300
             300kw
3ph,380V
600A
2-10KHZ
KGPS-400
400kw
3ph,380V
800A
         2-10KHZ
KGPS-500
500kw
3ph,380V
1000A
2-10KHZ
KGPS-800
800kw
3ph,380V
1600A
2-10KHZ
KGPS-1000
1000kw
3ph,380V
2000A
2-10KHZ
KGPS-1500
1500kw
3ph,380V
3000A
2-10KHZ
KGPS-2000
2000kw
3ph,380V
4000A
2-10KHZ
we have rich experience in producing  induction heating furnace ,most used in following application : 
1、Medium frequency induction reheating furnace for billet  heating and then into the rolling mill
 
2、heating billets for making rebar

intersting Products:*
Name:*
Company:
Email:*
Tel/Mobile:
Tell us your needs (as specific as possible)